Testex® Replica Tape
Testex® Replica Tape provides a permanent cast of the profile of a surface and can be measured using a thickness gauge H.
Testex® tape consists of a foam side with a non-compressible backing. The foam section is pressed against the surface providing a pattern of the peak-to-valley profile, which can then be measured using a thickness gauge.
Airblasting
Shot blasting
Surface cleaning
Testex® Replica Tape Thick Metric
20 - 64μm Imperial 0.8 - 2.5mils
Testex® X-Thick Metric Replica Tape 38 - 115μm Imperial 1.5 - 4.5mils
-
Surface Roughness Tester MarSurf PS10
The MarSurf Roughness Meter is a lightweight and portable solution to measure the range of surface roughness necessary to meet established requirements.
-
A tool to rank roughness achieved from very smooth to very rough
-
10X or 30X efficient magnifier to analyse your peened surfaces or abrasives
-
A quality high carbon steel grit, available in 4 hardness ranges, to suit the most demanding desanding, cleaning and surface preparation applications.
